If you have a website or an web app, speed is really important. The quicker your web site performs and then the quicker your apps operate, the better for you. Because a web site is simply an offering of data files that talk with one another, the devices that keep and access these data files play an important role in site general performance.

Hard drives, or HDDs, have been, right up until the past several years, the most trustworthy systems for saving information. However, recently solid–state drives, or SSDs, are actually gathering popularity. Look into our evaluation chart to view if HDDs or SSDs are more appropriate for you.

1. Access Time

Image

Resulting from a revolutionary new method of disk drive operation, SSD drives enable for noticeably faster data accessibility rates. Having an SSD, data file accessibility instances are much lower (under 0.1 millisecond).

Image

HDD drives still utilize the same basic data access technique that’s initially developed in the 1950s. Even though it was much improved since that time, it’s slow as compared with what SSDs are offering. HDD drives’ data access rate can vary in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

On account of the brand new radical data storage strategy shared by SSDs, they feature better data access speeds and speedier random I/O performance.

For the duration of Sitewarehouse’s tests, all SSDs confirmed their capability to work with at the least 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance progressively enhances the more you use the disk drive. Nevertheless, just after it extends to a specific limit, it can’t get faster. And due to the now–old technology, that I/O cap is a lot lower than what you could have with a SSD.

HDD can only go as far as 400 IO’s per second.

3. Reliability

Image

The lack of moving parts and spinning disks in SSD drives, as well as the latest advancements in electronic interface technology have ended in a significantly risk–free file storage device, with a common failure rate of 0.5%.

Image

For an HDD drive to operate, it should rotate two metal disks at more than 7200 rpm, holding them magnetically stable in mid–air. They have a massive amount moving components, motors, magnets as well as other devices jammed in a small location. Hence it’s obvious why the standard rate of failing of an HDD drive ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives are usually smaller than HDD drives and also they do not have any moving components at all. It means that they don’t produce so much heat and need much less power to operate and much less energy for chilling reasons.

SSDs consume somewhere between 2 and 5 watts.

Image

From the moment they were built, HDDs were always really power–heavy devices. So when you’ve got a hosting server with many different HDD drives, it will boost the month–to–month utility bill.

Typically, HDDs take in between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable a lot quicker data access speeds, that, in turn, enable the processor to perform data calls considerably faster and then to return to additional tasks.

The regular I/O hold out for SSD drives is 1%.

Image

Compared with SSDs, HDDs enable not so quick file accessibility speeds. The CPU will be required to wait for the HDD to return the required data file, reserving its assets while waiting.

The average I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

The majority of our completely new web servers are now using exclusively SSD drives. All of our lab tests have revealed that utilizing an SSD, the typical service time for an I/O request although running a backup continues to be below 20 ms.

Image

During the exact same tests sticking with the same server, now suited out using HDDs, efficiency was significantly slow. Throughout the server backup procedure, the average service time for I/O calls fluctuated between 400 and 500 ms.

7. Backup Rates

Image

You’ll be able to check out the real–world added benefits of having SSD drives on a daily basis. By way of example, on a web server pre–loaded with SSD drives, a full backup will take just 6 hours.

Image

In contrast, on a hosting server with HDD drives, a similar back up may take three or four times as long to finish. An entire back up of an HDD–powered server often takes 20 to 24 hours.

With Sitewarehouse, you can find SSD–driven hosting services at inexpensive price points. The cloud web hosting plans as well as our VPS hosting feature SSD drives by default. Apply for an hosting account along with us and experience the way your sites will become better straight away.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is installed for you totally free. 99.9% network uptime. Full SSH/full root access.
  • Compare our prices

  •  
  • Check out our prices and choose the perfect Virtual Private Server for your dynamic sites. You’ll be able to upgrade to a more feature–rich VPS Hosting plan with a mouse click.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us night and day by email or by utilizing our super–fast ticketing system. Our techs are ready to reply to any questions in up to 60 mins.